custom-made buckle-bu
|
- Basic Buckle-Bu with a straight top edge: £95
- Basic Buckle-Bu with headrest: £100 (Minimum wrap length Size 3) DESIGN FEATURES OF A BASIC BUCKLE -BU BODY PANEL: - A flat top edge and no sleep hood or headrest. - A shaped body panel with seat darts; - No buckles at side of body panel - shoulder straps clip directly into leg supports WAISTBAND: - 4" wide, soft, semi-structured waistband with a 50mm Dual adjust buckle and 2 x 65cm lengths of 50mm webbing; SHOULDER STRAPS: - Standard length 16", 4" wide, and generously padded with soft 14oz wadding; - 25mm Ladderlocks on both shoulder straps and leg support for easier tightening both forwards and backwards. LEG SUPPORTS: - Lightly padded leg supports that extend several inches beyond the width of the body panel. - Leg supports connect directly to the shoulder straps. CHEST STRAP: single loop, 25mm webbing with 25mm dual adjust buckle; |
|
Please see our DESIGN FEATURES page for help with choosing your options.
Please see our Custom Carrier Gallery page for examples of previous work.
Please see our Custom Carrier Gallery page for examples of previous work.
CARRIER SIZES:
- Infant: 15" wide
- Infant Plus: 17" wide
- Toddler: 19" wide
- Toddler Plus: 21" wide
- Pre-school: 23" wide.
- Infant: 15" wide
- Infant Plus: 17" wide
- Toddler: 19" wide
- Toddler Plus: 21" wide
- Pre-school: 23" wide.
Design features - optional extras:
Shoulder straps:
- Choose the length of your shoulder straps;
- Add Perfect Fit Adjusters: +£10
- Add Reverse Perfect Fit Adjusters: +£10
- Change ladderlock closing, "H" straps to loose, crossable buckle straps.
(Male part of buckle on shoulder strap, female part on leg support).
Waistbands:
- Change semi-structured waistband to firmer Structured waistband; no extra charge
- 4" wide, straight, padded waistband with sliding body panel (cover 2 sizes): +£10
- Extra padded cushion under the buckle and padded "tongue" under webbing: +£8
Sleep Hoods:
- Flat Sleep hood: + £10
- Flat sleep hood with chevrons (striped wraps only): + £16
- Adjustable Flat hood: + £12
- Extra long Adjustable sleep hood: £12
- Adjustable hood with chevrons (striped wraps only): + £18
-"Elf" hood: + £15
- Short Wizard Hood: £15 (subject to wrap length)
- Long Merlin Hood: £15 (subject to wrap length)
- Hood Tie:+ £2
(a small fabric tie on either side of the hood so that it can be rolled up and secured when not in use)
- Ears:
- Round "Bear" ears (must be combined with an Elf Hood): +£5
- Pointed "Cat" ears (must be combined with an Elf Hood): +£5
- Long "rabbit" ears (must be combined with an Elf Hood): +£8
- Dino spikes (must be combined with an Elf Hood): +£10
- Other hood appendages - (eg dragon/giraffe horns,character artwork etc) Please contact me for a quote
- Make hood detachable: +£5
Other Features:
- Height Cinchers: +£6
(these will allow you to shorten the height of the body panel by a couple of inches - not really necessary with a rollable waistband
- Width cinchers: +£5
(these will allow you to reduce the width of the body panel, at the level of baby's knees, by a couple of inches to avoid over-spreading).
- Leg padding + £5
(a cushioned area on each side of the carrier body to cushion the baby's legs)
- Accessory/Toy loop + £2
(a small fabric loop at the shoulder strap insertion for attaching a toy or dummy etc)
Shoulder straps:
- Choose the length of your shoulder straps;
- Add Perfect Fit Adjusters: +£10
- Add Reverse Perfect Fit Adjusters: +£10
- Change ladderlock closing, "H" straps to loose, crossable buckle straps.
(Male part of buckle on shoulder strap, female part on leg support).
Waistbands:
- Change semi-structured waistband to firmer Structured waistband; no extra charge
- 4" wide, straight, padded waistband with sliding body panel (cover 2 sizes): +£10
- Extra padded cushion under the buckle and padded "tongue" under webbing: +£8
Sleep Hoods:
- Flat Sleep hood: + £10
- Flat sleep hood with chevrons (striped wraps only): + £16
- Adjustable Flat hood: + £12
- Extra long Adjustable sleep hood: £12
- Adjustable hood with chevrons (striped wraps only): + £18
-"Elf" hood: + £15
- Short Wizard Hood: £15 (subject to wrap length)
- Long Merlin Hood: £15 (subject to wrap length)
- Hood Tie:+ £2
(a small fabric tie on either side of the hood so that it can be rolled up and secured when not in use)
- Ears:
- Round "Bear" ears (must be combined with an Elf Hood): +£5
- Pointed "Cat" ears (must be combined with an Elf Hood): +£5
- Long "rabbit" ears (must be combined with an Elf Hood): +£8
- Dino spikes (must be combined with an Elf Hood): +£10
- Other hood appendages - (eg dragon/giraffe horns,character artwork etc) Please contact me for a quote
- Make hood detachable: +£5
Other Features:
- Height Cinchers: +£6
(these will allow you to shorten the height of the body panel by a couple of inches - not really necessary with a rollable waistband
- Width cinchers: +£5
(these will allow you to reduce the width of the body panel, at the level of baby's knees, by a couple of inches to avoid over-spreading).
- Leg padding + £5
(a cushioned area on each side of the carrier body to cushion the baby's legs)
- Accessory/Toy loop + £2
(a small fabric loop at the shoulder strap insertion for attaching a toy or dummy etc)
ready to order?
If you have any further questions, or would like to book a wrap conversion slot, please fill in the form below or contact me via my FACEBOOK page.
