wrap conversion mei tai
|
- "BASIC" MEI TAI with a straight top edge: £50
"BASIC"" MEI TAI with a headrest: £55 (minimum wrap length size 6) Design features of a "Basic" Mei Tai: - Flat, un-shaped body panel; - 2.15m, "Wrap" style shoulder straps; - Continuous body panel and unpadded, apron-style waistband; - 2 x 65cm long, 10cm wide waist ties; - No sleep hood. |
Please see our DESIGN FEATURES page for help with choosing your options.
Please see our Wrap Conversion Gallery page for examples of previous work.
Please see our Wrap Conversion Gallery page for examples of previous work.
CARRIER SIZES:
- Infant: 15" wide
- Infant Plus: 17" wide
- Toddler: 19" wide
- Toddler Plus: 21" wide
- Pre-school: 23" wide.
- Infant: 15" wide
- Infant Plus: 17" wide
- Toddler: 19" wide
- Toddler Plus: 21" wide
- Pre-school: 23" wide.
Design features - optional extras:
Shoulder straps:
- Padded Mei Tai style shoulder straps: + £12 (4" wide and padded for the first 15")
- "Hybrid" padded-to-wrap shoulder straps: + £15 (4" wide, padded for the first 15" and then opening up to a single layer of wrap fabric which can be spread, wrap-style, under baby's bum)
- Combination wrap straps: +£15 (4" wide, padded for the first 15" with a flap that can be folded down to cup the shoulder. Straps then open up to a single layer of wrap fabric which can be spread, wrap-style, under baby's bum)
Waistbands:
#1) Add light padding to the base of body panel: +£5
Separate waistbands:
#2: 4" wide, straight, lightly quilted waistband that extends beyond the base of the body panel and which can be rolled up to shorten the body panel, or worn bottom edge down to lengthen it; a flat body panel with no seat darts: £10
#3: 5" wide, gently curved, semi-structured waistband; a flat body panel with no seat darts: + £15
#3: 5" wide, gently curved, semi-structured waistband with seat darts to give a shaped body panel and a deeper seat: +£20
Ring waistbands:
#1: Apron-style, un-padded, rollable waistband;
2 small sling rings on one side of waistband;
1.2m long wrap-strap style waist tie on the other side: +£5
- Add a ring cushion: +£4
#2: 5" wide, padded waistband, flat body panel with no seat darts;
2 small sling rings on one side;
1.2m long wrap-strap style waist tie on the other side: +£20
- Add ring cushion: +£4
#3: 5" wide, padded waistband with seat darts to give a shaped body panel and a deeper seat;
2 small sling rings on one side;
1.2m long wrap-strap style waist tie on the other side:+£25
- Add a ring cushion: +£4
[*Please note that if there is not enough fabric for a separate waistband, I will construct a padded waistband as a continuation of the body panel]
Sleep Hoods:
- Flat Sleep hood: + £10
- Flat sleep hood with chevrons (striped wraps only): + £16
- Adjustable Flat hood: + £12
- Extra long Adjustable sleep hood: £12
- Adjustable hood with chevrons (striped wraps only): + £18
-"Elf" hood: + £15
- Short Wizard Hood: £15 (subject to wrap length)
- Long Merlin Hood: £15 (subject to wrap length)
- Hood Tie:+ £2
(a small fabric tie on either side of the hood so that it can be rolled up and secured when not in use)
- Ears:
- Round "Bear" ears (must be combined with an Elf Hood): +£5
- Pointed "Cat" ears (must be combined with an Elf Hood): +£5
- Long "rabbit" ears (must be combined with an Elf Hood): +£8
- Dino spikes (must be combined with an Elf Hood): +£10
- Other hood appendages - (eg dragon/giraffe horns,character artwork etc) Please contact me for a quote
- Make hood detachable: +£5
Other Features:
- Height Cinchers: +£6
(these will allow you to shorten the height of the body panel by a couple of inches - not really necessary with a rollable waistband
- Width cinchers: +£5
(these will allow you to reduce the width of the body panel, at the level of baby's knees, by a couple of inches to avoid over-spreading).
- Leg padding + £5
(a cushioned area on each side of the carrier body to cushion the baby's legs)
- Accessory/Toy loop + £2
(a small fabric loop at the shoulder strap insertion for attaching a toy or dummy etc)
Shoulder straps:
- Padded Mei Tai style shoulder straps: + £12 (4" wide and padded for the first 15")
- "Hybrid" padded-to-wrap shoulder straps: + £15 (4" wide, padded for the first 15" and then opening up to a single layer of wrap fabric which can be spread, wrap-style, under baby's bum)
- Combination wrap straps: +£15 (4" wide, padded for the first 15" with a flap that can be folded down to cup the shoulder. Straps then open up to a single layer of wrap fabric which can be spread, wrap-style, under baby's bum)
Waistbands:
#1) Add light padding to the base of body panel: +£5
Separate waistbands:
#2: 4" wide, straight, lightly quilted waistband that extends beyond the base of the body panel and which can be rolled up to shorten the body panel, or worn bottom edge down to lengthen it; a flat body panel with no seat darts: £10
#3: 5" wide, gently curved, semi-structured waistband; a flat body panel with no seat darts: + £15
#3: 5" wide, gently curved, semi-structured waistband with seat darts to give a shaped body panel and a deeper seat: +£20
Ring waistbands:
#1: Apron-style, un-padded, rollable waistband;
2 small sling rings on one side of waistband;
1.2m long wrap-strap style waist tie on the other side: +£5
- Add a ring cushion: +£4
#2: 5" wide, padded waistband, flat body panel with no seat darts;
2 small sling rings on one side;
1.2m long wrap-strap style waist tie on the other side: +£20
- Add ring cushion: +£4
#3: 5" wide, padded waistband with seat darts to give a shaped body panel and a deeper seat;
2 small sling rings on one side;
1.2m long wrap-strap style waist tie on the other side:+£25
- Add a ring cushion: +£4
[*Please note that if there is not enough fabric for a separate waistband, I will construct a padded waistband as a continuation of the body panel]
Sleep Hoods:
- Flat Sleep hood: + £10
- Flat sleep hood with chevrons (striped wraps only): + £16
- Adjustable Flat hood: + £12
- Extra long Adjustable sleep hood: £12
- Adjustable hood with chevrons (striped wraps only): + £18
-"Elf" hood: + £15
- Short Wizard Hood: £15 (subject to wrap length)
- Long Merlin Hood: £15 (subject to wrap length)
- Hood Tie:+ £2
(a small fabric tie on either side of the hood so that it can be rolled up and secured when not in use)
- Ears:
- Round "Bear" ears (must be combined with an Elf Hood): +£5
- Pointed "Cat" ears (must be combined with an Elf Hood): +£5
- Long "rabbit" ears (must be combined with an Elf Hood): +£8
- Dino spikes (must be combined with an Elf Hood): +£10
- Other hood appendages - (eg dragon/giraffe horns,character artwork etc) Please contact me for a quote
- Make hood detachable: +£5
Other Features:
- Height Cinchers: +£6
(these will allow you to shorten the height of the body panel by a couple of inches - not really necessary with a rollable waistband
- Width cinchers: +£5
(these will allow you to reduce the width of the body panel, at the level of baby's knees, by a couple of inches to avoid over-spreading).
- Leg padding + £5
(a cushioned area on each side of the carrier body to cushion the baby's legs)
- Accessory/Toy loop + £2
(a small fabric loop at the shoulder strap insertion for attaching a toy or dummy etc)
ready to order?
If you have any further questions, or would like to book a wrap conversion slot, please fill in the form below or contact me via my FACEBOOK page.
